FITMENT LAB.

Your wheel fitment tool and planner. All the details in one place.

Want to talk about your setup?
Saved locally in your browser
RIM9J × 17BMW E46
TYRE245/45 R17nominal diameter 652.3 mm
EFFECTIVE OFFSET31.0ET 31 minus 0.0 mm spacer
CAMBER-3.0°ride-height measurements at 0 mm travel
FITMENT VIEW CROSS-SECTION

Edit: drag the green arm pivots or yellow strut points. The measurement fields update with them.

-80 mm rebound+100 mm bump
-3.00° camber
Set travel range

MacPherson · edit ride-height measurements · Custom dimensions

GROUNDHUB HEIGHTTOPMOUNT · 680.0 mm highLOWER · 330.00 mm c-to-c170.0 mm highHUB / KNUCKLEMove top mount · drag or use arrow keysMove strut clamp · drag or use arrow keysMove inner lower arm pivot · drag or use arrow keys
OUTSIDE ←20 mm grid · 1:1 proportions→ INSIDE

Drag wheel handles and inner arm pivots to edit your setup. Choose Test travel to move the wheel. Drag the background to pan. Scroll to zoom around your cursor.

Drag one rim edge: the opposite edge stays fixed while width and offset change together. The offset handle moves the whole rim without changing its width.

Yellow points move the top mount and strut clamp. Hub and wheel rotate with them; the installation angle stays fixed. Arrow keys: 1 mm; Shift + arrow: 10 mm.

Limits not set

BMW E46

Width between bead seats228.6 mm
Overall rim width with flanges254.0 mm
Overall tyre diameter652.3 mm
Tyre circumference2,049.3 mm
Sidewall height110.3 mm
Inner rim distance from hub158.0 mm
Outer rim at current camber84.0 mm

You are viewing this setup only. Choose Compare to overlay other setups and see the differences.

How to use Fitment Lab
01

Compare your setups

Select a setup to view it individually. Choose Compare for an overlay, pick a reference and use the coloured squares to show or hide setups.

02

Record what fits

Use a known fitting setup to capture rim and tyre limits separately. Set a clearance reserve for the extra space you want.

03

Work out the details

Adjust camber and spacers and follow the advice. Enter centre-to-centre lengths and mounting heights under Suspension. Drag the wheel handles and export your project or drawing.

Geometric estimate based on nominal dimensions. Tyre profiles and rim flanges vary by model. The camber curve uses 2D kinematics with fixed pivots. Steering angle, caster and mechanical stops are not simulated. Check the final fitment on the car.